UNBT-1180L1 Bimetallic cylinder Liner and Mud pump parts working environment:
Open air, oil, gas, gas condensate, drilling fluid, BGRP mixture, OBM (hydrocarbon-based drilling fluid, oil content up to 85%). polymer clay solution, chlorine-potassium solution, weighted solutions, SGS 18 (heavy saline solution).
UNBT-1180L1 Bimetallic cylinder Liner and Mud pump parts working Temperature:
up to -60 degrees C Installation temperature: -45 degrees C +40 degrees C Temperature of the pumped medium up to +80 degrees C.
UNBT-1180L1 Mud Pump
“Uralmash Oil and Gas Equipment Holding” produces mud pumps with a capacity from 800 to 2200 HP, such as UNBT-600L, UNBT-1180L, UNBT-1600L.
Mud pumps are designed to supply drilling mud in the process of drilling deep exploration and production wells, mainly for oil and gas, in macroclimatic areas with a temperate climate category U1 according to GOST 15150-69 (-45°C…+40°C).
Pumped medium-drilling mud on oil or water basis with the addition of oil and petroleum products from 5% to 20%, chemicals, weighting agent.
The total solids content is up to 40% of the volume at a drilling mud density of 20 lb/gal. The size of the solid particlesup to 0.1 mm. Conditional viscosity – from 20 to 100 seconds. Mineralization – up to 15%. The content of dissolved gas – up to 2%.
| № | Description in English | Catalog number |
| 1 | Electric pump unit INS 220 6x5x14 55 kW, I005.00.000-SB6514-55 | 220 6x5x14 55 kW, I005.00.000-SB6514-55 |
| 2 | Electric pump unit INS 220 8x6x14 55 kW, I005.00.000-SB8614-55 | 220 8x6x14 55 kW, I005.00.000-SB8614-55 |
| 3 | Electric pump unit INS 220 8x6x14 75 kW, I005.00.000-SB8614-75 | 220 8x6x14 75 kW, I005.00.000-SB8614-75 |
| 4 | Distribution block 14036.53.460sb | 14036.53.460sb |
| 5 | Bolt M12 54025.53.005 | 12 54025.53.005 |
| 6 | Bolt M16 54025.53.194-01 | 16 54025.53.194-01 |
| 7 | Bolt M20 4045.53.126-2 | 20 4045.53.126-2 |
| 8 | Bolt M20 54025.53.502 | 20 54025.53.502 |
| 9 | Bolt M30 14036.53.191 | 30 14036.53.191 |
| 10 | Bolt M30 4066.53.596 | 30 4066.53.596 |
| 11 | Bolt M36 4066.53.597 | 36 4066.53.597 |
| 12 | Bolt M48x3 4045.53.36-1 | 48×3 4045.53.36-1 |
| 13 | Spacer bolt 14001.53.437 | 14001.53.437 |
| 14 | Spacer bolt St40X 54025.53.501 | 40Х 54025.53.501 |
| 15 | Clamp bolt M16 54025.53.194-01 | 16 54025.53.194-01 |
| 16 | Transmission shaft 14016.53.090sb | 14016.53.090sb |
| 17 | Transmission shaft 14099.53.230sb | 14099.53.230sb |
| 18 | Transmission shaft 54025.53.300SB | 54025.53.300SB |
| 19 | Valve 15B 3R Du=32 TU 26-07-1392-86 9018010000000004 | 15B 3R Du=32 TU 26-07-1392-86 9018010000000004 |
| 20 | Valve 15B1BK DU=15 TU 26-07-1392-86 01312011031 | 15B1BK DU=15 TU 26-07-1392-86 01312011031 |
| 21 | Valve SM 23157.003.00 PP=40MPa DN=3 TU 26-07-1220-81 9018-01-0010002 | 23157.003.00 Рр=40MPa Du=3 TU 26-07-1220-81 9018-01-0010002 |
| 22 | Angle valve DN 3mm Prab 40MPa (400 kg/cm2) UNB-600 | 3mm Rrab 40MPa (400 kg/cm2) for UNB-600 |
| 23 | Screw 14036.53.428 | 14036.53.428 |
| 24 | Screw 14036.53.982-1 | 14036.53.982-1 |
| 25 | Screw 4066.53.724 | 4066.53.724 |
| 26 | Screw 54025.53.352 | 54025.53.352 |
| 27 | Screw GOST R ISO 2009-M8x20-4.8-A2R 5004050300000022 | 2009-M8x20-4.8-A2R 5004050300000022 |
| 28 | Screw M8 54025.53.380 | 8 54025.53.380 |
| 29 | Insert 44040.53.072 | 44040.53.072 |
| 30 | Pump insert UNBT-950 14036.53.002 | 950 14036.53.002 |
| 31 | Insert 54034.53.168 | 54034.53.168 |
| 32 | Liner 14007.53.522 | 14007.53.522 |
| 33 | Liner 14036.53.104 | 14036.53.104 |
| 34 | Liner 14036.53.248 | 14036.53.248 |
| 35 | Liner 14073.53.141 | 14073.53.141 |
| 36 | Liner 4055.53.58 | 4055.53.58 |
| 37 | Liner 4066.53.17 | 4066.53.17 |
| 38 | Liner 4066.53.542-1 | 4066.53.542-1 |
| 39 | Liner 4066.53.558-2sb | 4066.53.558-2sb |
| 40 | Liner 54025.53.152 | 54025.53.152 |
| 41 | Liner 54025.53.391 | 54025.53.391 |
| 42 | Liner 54034.53.192 | 54034.53.192 |
| 43 | Bronze Liner 4045.53.66-1 | 4045.53.66-1 |
| 44 | Support Liner 44013.53.079 | 44013.53.079 |
| 45 | Support Liner 54034.53.131 | 54034.53.131 |
| 46 | Support Liner 54035.53.712 | 54035.53.712 |
| 47 | Centering sleeve 44013.53.125 | 44013.53.125 |
| 48 | Cylindrical Liner 130mm 14073.53.342-06SB | 130mm 14073.53.342-06SB |
| 49 | Cylindrical Liner 140mm 14073.53.342-05SB | 140mm 14073.53.342-05SB |
| 50 | Cylindrical Liner 150mm 14073.53.342-04SB | 150mm 14073.53.342-04SB |
| 51 | Cylindrical Liner 160mm 14073.53.342-03SB | 160mm 14073.53.342-03SB |
| 52 | Cylindrical Liner 170mm 14073.53.342-02SB | 170mm 14073.53.342-02SB |
| 53 | Cylindrical Liner 180mm 14073.53.342-01SB | 180mm 14073.53.342-01SB |
| 54 | Cylinder Liner D130 UNBT-1180 | 130 UNBT-1180 |
| 55 | Cylinder Liner D-140 44023.53.307-06 | 140 44023.53.307-06 |
| 56 | Cylinder Liner D140 UNBT-1180 | 140 UNBT-1180 |
| 57 | Cylinder Liner D-150 44023.53.307-05 | 150 44023.53.307-05 |
| 58 | Cylinder Liner D150 UNBT-1180 | 150 UNBT-1180 |
| 59 | Cylinder Liner D-160 44023.53.307-04 | 160 44023.53.307-04 |
| 60 | Cylinder Liner D160 UNBT-1180 | 160 UNBT-1180 |
| 61 | Cylinder Liner D160mm for UNBT-600 | 160mm for UNBT-600 |
| 62 | Cylinder Liner D-170 44023.53.307-03 | 170 44023.53.307-03 |
| 63 | Cylinder Liner D170 UNBT-1180 | 170 UNBT-1180 |
| 64 | Cylinder Liner D-180 44023.53.307-02 | 180 44023.53.307-02 |
| 65 | Cylinder Liner D180 UNBT-1180 | 180 UNBT-1180 |
| 66 | Bimetallic cylinder Liner d 150 mm 4066.53.501-05 | 150 mm 4066.53.501-05 |
| 67 | Bimetallic cylinder Liner d 160 mm 4066.53.501-04 | 160 mm 4066.53.501-04 |
| 68 | Bimetallic cylinder Liner d 170 mm 4066.53.501-03 | 170 mm 4066.53.501-03 |
| 69 | Bimetallic cylinder Liner d 180 mm 4066.53.501-02 | 180 mm 4066.53.501-02 |
| 70 | Bimetallic cylinder liner D 140 UNBT1180L-52 44040.53.034-05/52MPa | 140 Drilling UNBT1180L-52 44040.53.034-05/52MPa |
| 71 | Bimetallic cylinder liner D 160 UNBT1180L-52 44040.53.034-03/52MPa | 160 Drilling UNBT1180L-52 44040.53.034-03/52MPa |
| 72 | Bimetallic cylinder liner D 170 UNBT1180L-52 44040.53.034-02/52MPa | 170 Drilling UNBT1180L-52 44040.53.034-02/52MPa |
| 73 | Bimetallic cylinder liner D 180 UNBT1180L-52 44040.53.034-01/52MPa | 180 Drilling UNBT1180L-52 44040.53.034-01/52MPa |
| 74 | Bimetallic cylinder Liner d140, 44040.53.034-05SBSB | 140, 44040.53.034-05SBSB |
| 75 | Bimetallic cylinder Liner d150, 44040.53.034-04SBSB | 150, 44040.53.034-04SBSB |
| 76 | Bimetallic cylinder Liner d160, 44040.53.034-03SBSB | 160, 44040.53.034-03SBSB |
| 77 | Bimetallic cylinder Liner d170, 44040.53.034-02SBSB | 170, 44040.53.034-02SBSB |
| 78 | Bimetallic cylinder Liner d180, 44040.53.034-01SBSB | 180, 44040.53.034-01SBSB |
| 79 | Bimetallic cylinder Liner diameter 130mm 14036.53.430-05SB TU 3661-001-62721589-2010 | 130mm 14036.53.430-05SB TU 3661-001-62721589-2010 |
| 80 | Bimetallic cylinder Liner diameter 140mm 14036.53.430-04SB TU 3661-001-62721589-2010 | 140mm 14036.53.430-04SB TU 3661-001-62721589-2010 |
| 81 | Bimetallic cylinder Liner diameter 150mm 14036.53.430-03SB TU 3661-001-62721589-2010 | 150mm 14036.53.430-03SB TU 3661-001-62721589-2010 |
| 82 | Bimetallic cylinder Liner diameter 150mm 44040.53.034-04 TU 3661-001-62721589-2010 | 150mm 44040.53.034-04 TU 3661-001-62721589-2010 |
| 83 | Bimetallic cylinder Liner diameter 160mm 14036.53.430-02SB TU 3661-001-62721589-2010 | 160mm 14036.53.430-02SB TU 3661-001-62721589-2010 |
| 84 | Bimetallic cylinder Liner diameter 160mm 44040.53.034-03 TU 3661-001-62721589-2010 | 160mm 44040.53.034-03 TU 3661-001-62721589-2010 |
| 85 | Bimetallic cylinder Liner diameter 170mm 14036.53.430-01SB TU 3661-001-62721589-2010 | 170mm 14036.53.430-01SB TU 3661-001-62721589-2010 |
| 86 | Bimetallic cylinder Liner diameter 180mm 14036.53.430SB TU 3661-001-62721589-2010 | 180mm 14036.53.430SB TU 3661-001-62721589-2010 |
| 87 | Bimetallic cylinder Liner diameter 180mm 44040.53.034-01 TU 3661-001-62721589-2010 | 180mm 44040.53.034-01 TU 3661-001-62721589-2010 |
| 88 | Cylinder Liner diameter 130mm 4066.53.501-07 | 130mm 4066.53.501-07 |
| 89 | Cylinder Liner diameter 140mm 4066.53.501-06 | 140mm 4066.53.501-06 |
